Procedure
1. Enter the password in "Password".
2. To confirm the password, enter the password again in "Password Confirmation".
3. Select the "Enabled" option.
4. Click the "Set Values" button.
4.5.5 Events
4.5.5.1 Event Configuration
Selecting system events
On the WBM page, you define which system events are reported and how, or execute a follow-
up reaction.
The following messages are always entered in the event log table and cannot be deselected:
● Changing the admin password
● Starting the device
● Operational status of the device, e.g. whether or not a PLUG is inserted
● Status of errors not yet dealt with
To send these messages to a Syslog server as well, select the "Syslog" check box for the event
"System General Logs".
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 137
To Next Page
Loading...
