Description
With Table 1, you can enable or disable all check boxes of a column of Table 2 at once.
Table 1 has the following columns:
● All Events
Shows that the settings are valid for all events of table 2.
● E-mail / Trap / Log Table / Syslog / Fault / SMS / Digital Out / VPN Tunnel / Cloud
Connector / Firewall
Enable or disable the required type of notification for all events. If "No Change" is selected,
the entries of the corresponding column in table 2 remain unchanged.
● Copy To Table
If you click the button, the setting is adopted for all events of table 2.
Configuring with Web Based Management
4.5 "System" menu
SCALANCE S615 Web Based Management
138 Configuration Manual, 11/2019, C79000-G8976-C388-08
To Next Page
Loading...
