4.7.4 Spanning Tree
4.7.4.1 General
This is the basic page for spanning tree. As default, Rapid Spanning Tree is enabled.
Description
The page contains the following boxes:
● Spanning Tree
Enable or disable spanning tree.
● Protocol Compatibility
The following setting is available:
– RSTP
Procedure
1. Select the "Spanning Tree" check box.
2. Click the "Set Values" button.
Configuring with Web Based Management
4.7 "Layer 2" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 223
To Next Page
Loading...
