● Interface Name
Shows the name of the interface.
● MAC Address
Shows the MAC address.
● IP Address
Shows the IPv4 address of the subnet.
● Subnet Mask
Shows the subnet mask.
● Address Type
Shows the address type. The following values are possible:
– Primary
The first IPv4 address that was configured on the IPv4 interface.
– Secondary
All other IPv4 addresses that were configured on the IPv4 interface.
● IP Assignment Method
Shows how the IPv4 address is assigned. The following values are possible:
– Static
The IPv4 address is static. You enter the settings in "IP Address" and "Subnet Mask".
– Dynamic (DHCP)
The device obtains a dynamic IPv4 address from a DHCPv4 server.
Configuring with Web Based Management
4.8 "Layer 3" menu
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08 233
To Next Page
Loading...
