Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.3 "Information" menu
SCALANCE SC-600 Web Based Management (WBM)
104 Configuration Manual, 10/2021, C79000-G8976-C475-03
4.3.13 Multicast
Status of the multicast filter table
This table shows the multicast frames currently entered in the multicast filter table and
their destination ports. The entries are configured statically by the user.
Description of the displayed values
The table contains the following columns:
• VLAN ID
Shows VLAN ID of the VLAN to which the MAC multicast address is assigned.
• MAC Address
Shows the MAC multicast address that the device has learned or the user has
configured.
• Status
Shows the status of each address entry. The following information is possible:
– Static
The address was entered statically by the user. Static addresses are stored
permanently; in other words, they are not deleted when the aging time expires or
when the device is restarted. These must be deleted by the user.

Siemens SIMATIC NET SCALANCE SC-600 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC-600
Category	Switch
Language	English