Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
131
4.4.4 Restart
Resetting to the defaults
Using the WBM page, you can restart the device manually or as scheduled. In addition,
there are various options for resetting to the device defaults.
Note
Note the following points about restarting a device:
•
You can only restart the device with administrator privileges.
•
A device should only be restarted with the buttons of this menu and not by a power
cycle on the device.
•
If the device is in "Trial" mode, configuration modifications must be saved manually
before a restart. Any modifications you have made only become active on the device
after clicking the "Set values" button on the relevant WBM page.
•
If the device is in "Automatic Save" mode, the last changes are saved automatically
before a restart.

Siemens SIMATIC NET SCALANCE SC-600 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC-600
Category	Switch
Language	English