Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.3 "Information" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
95
Description
The table has the following columns:
• Destination Network
Shows the destination address of this route.
• Subnet Mask
Shows the subnet mask of this route.
• Gateway
Shows the gateway for this route.
• Interface
Shows the interface for this route.
• Metric
Shows the metric of the route. The higher value, the longer packets require to their
destination.
• Routing Protocol
Shows the routing protocol from which the entry in the routing table originates. The
following entries are possible:
– Connected: Connected routes
– Static: Static routes
– DHCP: Routes via DHCP
4.3.11 Redundancy
4.3.11.1 Spanning Tree
Introduction
The page shows the current information about the spanning tree and the settings of the
root bridge.

Siemens SIMATIC NET SCALANCE SC-600 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC-600
Category	Switch
Language	English