Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
146 Configuration Manual, 10/2021, C79000-G8976-C475-03
Follow the steps below to reuse configuration data:
1. Save the configuration data of a configured device on your PC.
2. Load these configuration files on all other devices you want to configure in this way.
3. If individual settings are necessary for specific devices, these must be made online on
the relevant device.
Note
Configuration data has a checksum. If you change the data, you can no longer upload it
to the device.
4.4.5.5 Passwords
There are files to which access is password protected. To load the file on the device,
enter the password specified for the file on the WBM page.
Description
The table has the following columns:
• Type
Shows the file type.
• Description
Shows the short description of the file type.
• Setting
When selected, the password is used. Can only be enabled if the password is
configured.

Siemens SIMATIC NET SCALANCE SC-600 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC-600
Category	Switch
Language	English