Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
139
CLI script file
You can download existing CLI configurations (RunningCLI) and upload your own CLI
scripts (Script).
Note
The downloadable CLI script is not intended to be uploaded again unchanged.
CLI commands for saving and loading files cannot be
executed with the CLI script file
Exchange of configuration data with STEP 7 Basic/Professional using a file
You use the two file types "RunningSINEMAConfig" and "SINEMAConfig" to exchange
configuration data between a device (WBM) and STEP 7 Basic/Professional via a file.
Requirements:
• Same article number
• Same firmware version
• Password
You assign the password in the WBM under "System > Load&Save > Passwords".
You can use the file types as follows:
• For offline diagnostics
You can save the faulty configuration of a device as "RunningSINEMAConfig" via the
WBM and import it in STEP 7 Basic/Professional. No connection to a real device is
required for the diagnostics in STEP 7 Basic/Professional. You can export a corrected
configuration and load it as "SINEMAConfig" again using the WBM.
• For configuration
No connection to a real device is required to configure a device in STEP 7
Basic/Professional. You can export the configuration and load it as "SINEMAConfig"
to the real device using the WBM.
X509 certificates
The following file types can be loaded into the device:
• .crt, pem, zip: Maximum file name length 255 characters
• .p12: Maximum file name length 248 characters
To Next Page
Loading...
