To Next Page

To Previous Page

Configuring with Web Based Management

4.5 "Layer 2" menu

SCALANCE SC-600 Web Based Management (WBM)

254 Configuration Manual, 10/2021, C79000-G8976-C475-03

Description of the displayed boxes

The page contains the following boxes:

• VLAN ID

If you click on this text box, a drop-down list is displayed. Here you can select the

VLAN ID of a new MAC address you want to configure.

• MAC address

Here you enter a new MAC multicast address you want to configure.

The table has the following columns:

• Select

Select the row you want to delete.

• MAC address

Here, the multicast address is displayed that the device has learned or the user has

configured.

• Status - Static

Shows the status of each address entry. The address was entered statically by the

user. Static addresses are stored permanently; in other words, they are not deleted

when the Aging-Time expires or when the device is restarted. These must be deleted

by the user.

Configuration procedure

Creating a new entry

1. Select the required VLAN ID from the ""drop-down list.

2. Enter the MAC address in the "MAC address" input box.

3. Click the "Create" button. A new entry is generated in the table.

4. Assign the relevant ports to the MAC address.

5. Click the "Set Values" button.

Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Other manuals for Siemens SIMATIC NET SCALANCE SC-600