Siemens SIMATIC NET SCALANCE SC-600 - Page 367

Appendix A
A.3 Syslog messages
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
367
Message text
{protocol}: Failed to load file type Firmware.
Example
WBM: Failed to load file type Firmware.
Explanation
Firmware upload has failed.
Severity
Warning
Facility
local0
Standard
IEC 62443-3-3 Reference: SR7.4
Message text
{protocol}: Loaded file type Config (restart required).
Example
TFTP: Loaded file type Config (restart required).
Explanation
The configuration is applied.
Severity
Notice
Facility
local0
Standard
IEC 62443-3-3 Reference: SR7.4
Message text
{protocol}: Loaded file type ConfigPack (restart required).
Example
TFTP: Loaded file type ConfigPack (restart required).
Explanation
The configuration is applied.
Severity
Notice
Facility
local0
Standard
IEC 62443-3-3 Reference: SR7.4
Message text
{protocol}: User {user name} loaded file type Config (restart required).
Example
WBM: User admin loaded file type Config (restart required).
Explanation
The configuration is applied.
Severity
Notice
Facility
local0
Standard
IEC 62443-3-3 Reference: SR7.4
Message text
{protocol}: User {user name} loaded file type ConfigPack (restart required).
Example
WBM: User admin loaded file type ConfigPack (restart required).
Explanation
The configuration is applied.
Severity
Notice
Facility
local0
Standard
IEC 62443-3-3 Reference: SR7.4