Programming via Rockwell controller
9.5 Programming add-on instructions
SIMATIC RF600
114 Configuration Manual, 11/2018, C79000-G8976-C386-07
With the aid of the "Reset_RF68xR" block, you can reset the RF680R and RF685R readers.
The reader is reset to the settings configured on the reader with the WBM. The
"Reset_RF68xR" block does not have any device-specific parameters and is executed using
the "EXECUTE" parameter.
With the "Reset_RF68xR" block, you can interrupt any active Ident block at any time. The
blocks are then ended with "DONE = true" and "ERROR = false".
Figure 9-3 "Reset_RF68xR" block
To Next Page
Loading...
