Siemens SIMATIC RF615R - Getantennas

Programming via XML interface
10.3 XML commands
SIMATIC RF600
170 Configuration Manual, 11/2018, C79000-G8976-C386-07
</returnValue>
</getAllSources>
</reply>
</frame>
// opt → Optional: Line can be omitted.
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 213)".
Parameter
Parameter
Type
Values
Description
value_id Decimal value
0...9
0...4294967295 Unique command identifier
value_
sourceName
Text -- Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 52
)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
10.3.2.16
getAntennas
The command returns all antennas that are configured at the specified read point.
This command is supported as of API protocol version V2.1.
Command
<frame>
<cmd>
<id> value_id </id>
<getAllAntennas>
<sourceName> value_ sourceName <sourceName>
</getAllAntennas>
</cmd>
</frame>