Siemens SIMATIC RF615R - Negative XML Replies

Programming via XML interface
10.3 XML commands
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
213
10.3.4
Negative XML replies
If problems occur during the execution of the command, the reader reports this to the user
application. These error messages always include an event code ≠ 0 and information about
the problem.
Reply
<frame>
<reply>
<id> value_id </id>
<resultCode> value_resultCode </resultCode>
<error>
<name> value_name </name>
<cause> value_cause </cause>
</error>
</reply>
</frame>
Parameter
Parameter
Type
Values
Description
value_id Decimal value
0...9
0...4294967295 Unique command identifier
value_resultCode Decimal value
0...9
0...65535 Identification number of the error
You will find a list of possible return
codes in the following table.
value_name Text -- Textual description of the error
You will find descriptions of the prob-
lems in the following table.
value_cause Text -- Brief description of the cause of the
negative reply.
List of possible result codes
Result code
Name
Description
hex
dec
0x00 0 NO_ERROR Positive reply, command processed suc-
cessfully.
0x13 19 ERROR_MEMORY_OVERRUN Access outside the addressed memory
area.
0x1A 26 ERROR_TAG_LOCKED The transponder to which data is meant to
be written or which should be deactivated is
locked.
0x91
145
ERROR_NO_ASWER_FROM_TAG
The transponder is not responding.