Siemens SIMATIC RF615R - Page 14

Description
3.1 Properties of the UHF readers
SIMATIC RF600
14 Configuration Manual, 11/2018, C79000-G8976-C386-07
Characteristics
The following features characterize the RF600 readers:
Table 3- 1 Characteristics of the readers
Characteristics
RF615R
RF650R
RF680R
RF685R
Antennas 1 x internal anten-
na
1 x external an-
tenna connector
4 x external antenna connectors 1 x internal, adap-
tive antenna
1 x external an-
tenna connector
Transmit power
(max.)
1)
400 mW 1000 mW 2000 mW
Digital inputs/
outputs
1x DI/DQ 4x DI and 4x DQ
RS-422 interface 1x socket,
M12 (8-pin)
-- 1x socket, M12 (8-pin)
PROFIBUS con-
nection
via CM
-- ASM 456
(115.2 kbps)
Ethernet interface 1 x Industrial
Ethernet, M12
1 x Industrial
Ethernet, RJ-45
2 x Industrial Ethernet, M12
Transmission
speed (max.)
100 Mbps
Degree of protec-
tion
IP65 IP30 IP65
Configura-
tion/diagnostics
options
WBM (browser)
STEP 7 (S7)
WBM (browser) WBM (browser)
STEP 7 (S7)
Interfaces to
PC/controller
XML interface
SIMATIC interface
(OPC UA,
PROFINET-
capable)
XML interface
(TCP/IP with XML
protocol, OPC UA)
XML interface
SIMATIC interface
(TCP/IP with XML protocol, OPC UA,
Ethernet/IP or PROFINET capability)
1)
The maximum transmit power is restricted depending on the country of use.
NOTICE
IRT is not supported
Note that the RF615R/RF680R/RF685R readers do not support IRT (Isochronous Real
Time). The readers can also not function as IRT conductors (e.g. in a bus structure).
The readers can be configured as clients in MRP rings. Network diagnostics via SNMP is
supported by the readers.