Siemens SIMATIC S5-95F User Manual

S5-95F Operations List
EWA 4NEB 812 6210-02 C-17
Abbreviation Explanation
Permissible Operand Value Range for
S5-95F
FW Flag word - retentive
- non-retentive
(0 to 62)
(64 to 254)
I Input (0.0 to 127.7)
IB Input byte (0 to 127)
INP DB1 parameter: activate interrupt on negative and
positive edge
IP DB1 parameter: activate interrupt on positive edge
IPN DB1 parameter: activate interrupt on positive and
negative edge
IW Input word (0 to 126)
KB Constant (1 byte) (0 to 255)
KBE DB1 parameter: SINEC L1, position of the
”Receive” coordination byte
KBS DB1 parameter: SINEC L1, position of the ”Send”
coordination byte
KC Constant (count) (0 to 999)
KF Constant (fixed-point number) (- 32768 to +32767)
KH Constant (hexadecimal code) (0 to FFFF)
KM Constant (2-byte bit pattern) (arbitrary bit pattern:
16 bits)
KS Constant (2 characters) (any two alphanumeric characters)
KT Constant (time) (0.0 to 999.3)
KY Constant (2 bytes) (0 to 255 per byte)
LAD STEP 5 ladder diagram method of representation
NT DB1 parameter: number of timers being processed
OB Organization block
for special applications:
1, 2, 3, 13, 21, 22, 31, 34, 37, 251
(0 to 255)
OB13 DB1 parameter: interval (ms) within which OB13 is
called and processed
OBA DB1 block ID for onboard analog inputs
OBC DB1 block ID for onboard counters
OBI DB1 block ID for onboard interrupt
OHE DB1 parameter: enable operating hours counter
OHS DB1 parameter: set operating hours counter
OP Operator panel
OV Overflow. This condition code bit is set if, e.g., a
numerical range is exceeded during arithmetic
operations.
PB Program block
(with block call and return operations)
(0 to 255)

Siemens SIMATIC S5-95F Specifications

General

Brand	Siemens
Model	SIMATIC S5-95F
Category	Controller
Language	English