Siemens SIMATIC S5-95F User Manual

Application S5-95F
17.5 Entering Configuring Data with COM 95F
Once the blocks have been entered, you must generate data block DB1 with COM 95F. DB1
contains the configuring data for the S5-95F. To generate this block, proceed as follows:
Call COM 95F on the programmer
In the DEFAULTS form, enter the name of the program file containing the user program for the
S5-95F
Confirm with <F6>
Enter the configuring target with <F2> "FD configuring"
Configuring the Onboard Inputs for the Short-Circuit Test
Press the following function keys in succession:
- <F2> "IO config"
- <F1> "Onboard"
- <F1> "DI"
Result: The "Configuring the onboard DIs (DI 32/33)" is displayed on the programmer screen:
Figure 17-4. Sample "Configuring the Onboard DIs (DI 32/33)" Screen Form
Configuring the onboard DIs (DI 32/33) COM 95 F / PEC22
F3
SELECT
F4
DEFAULT
VALUES
F5F2F1
CHANGE
F6 F7 F8
RETURN
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
F5
a a a a a a a a a a a a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a
a a a a a a a a a a
a
a a a a a a a a a a a a
F2
Bits -->
DI byte 32
DI byte 33
0
red
red
1
red
red
2
red
red
3
red
red
4
red
red
5
red
red
6
red
red
7
red
red
Digital input 32.0
Signal group (0 ... 31): 5
OB3 interrupt (Y/N): No
Discrepancy time (short/average) Average 5ms
Short-circuit test DQ (Y..33.0..33.3, 34.0..34.3/N): Yes 33.0
17-8 EWA 4NEB 812 6210-02

Siemens SIMATIC S5-95F Specifications

General

Brand	Siemens
Model	SIMATIC S5-95F
Category	Controller
Language	English