Siemens SIMATIC S5-95F User Manual

Installing and Connecting the Basic System
S5-95F
4.1.1 S5-95F Basic Unit
As shown in Figure 4-1, an S5-95F programmable controller consists of two basic units. The
following section describes mounting of one basic unit. The other basic unit is mounted in the same
way.
How to Mount an S5-95F Basic Unit
The basic unit is mounted on a standard mounting rail:
) Hook the basic unit onto the standard mounting rail.
) Swing it back, until the slide on the bottom of the basic unit audibly snaps into place.
Figure 4-2 shows the installation of a basic unit.
Figure 4-2. Mounting a Basic Unit on a Standard Mounting
Rail
4-2
EWA ~NEB 8126210-02

Siemens SIMATIC S5-95F Specifications

General

Brand	Siemens
Model	SIMATIC S5-95F
Category	Controller
Language	English