Installation
6.2 Installing the mounting rail
Automation system
128 System Manual, 01/2023, A5E03461182-AK
Tools required
• Commercially available hacksaw
• Drill ∅ 6.5 mm
• Screwdriver
• Size 10 adjustable screw-wrench or socket wrench for grounding cable connection
• Adjustable screw-wrench, matching the selected fixing screws
• Stripping tool and crimp tool for the grounding cable
Required accessories
Use the following screw types for fastening the mounting rails:
Table 6- 1 Required accessories
• Outer fixing screws
• Additional fixing screws (for mount-
ing rails > 482.6 mm)
Choose a suitable screw length for your
assembly.
You also need washers for cylinder
head screws with an internal diameter
of 6.4 mm and an external diameter of
M6 hex screw
To Next Page
Loading...
