Siemens Simatic S7-1500 / ET 200MP - Page 292

CPU display
Automation system
System Manual, 01/2023, A5E03461182-AK
291
Operating temperature for the display
To increase the service life of the display, the display switches off when the permitted
operating temperature is exceeded. When the display has cooled down again, it switches on
automatically again. When the display is switched off, the LEDs continue to show the status
of the CPU.
Information about the temperatures at which the display switches off and back on again is
available in the technical data of the manuals of the CPUs.
Note
The S7
-1500 CPU has no internal temperature measurement. Reading out the internal
temperature of the S7-1500 CPU is not supported.
Display
The following figures show an example of a CPU with large display (left: for example,
CPU 1516-3 PN/DP) and a CPU with small display (right: for example, CPU 1511-1 PN).
①
CPU status information
②
Names of the menus
③
Data display field
④
Navigation aid, e.g. OK/ESC or the page number
Figure 13-1 Example views of the displays