Siemens SIMATIC S7-1500T Getting Started

Software section
3.5 Team engineering via Inter Project Engineering
S7-1500
114 Getting Started, 05/2014, A5E03981761-AC
3.5.3
Importing an IPE file
Introduction
In the engineering office, the project engineer creates a device proxy in a new project and
initializes it with the CPU data from the IPE file. The project engineer repeats the initialization
for each update of the IPE file.
Procedure
1. Create the device proxy for the CPU in a new project and initialize it.
2. Use the Device Wizard to insert a Basic Panel.
3. Create the HMI tag for the fill level of the "Cyan" color and select the PLC tag.

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English