Siemens SIMATIC S7-1500T Getting Started

Hardware section
2.3 Wiring
S7-1500
24 Getting Started, 05/2014, A5E03981761-AC
2.3.4
Wiring the load current supply (PM) to the CPU
Procedure
1. Wire the 4-pin connector plug of the load current supply (PM).
2. Wire the 4-pin connector plug with the 4-pin mains connection plug of the CPU.
3. Connect the load current supply (PM) to the CPU.
Result
The load current supply is now wired to the CPU.

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English