The new SIMATIC S7-1500 controller family with the Totally Integrated Automation Portal
(TIA Portal) offers you numerous new options to further increase the productivity of your
machines and to make the engineering process even more efficient. Explore the options in
this Getting Started.
In the first basic steps, you will get to know the new hardware better. We will also show you
how to configure and program the SIMATIC S7-1500 with SIMATIC STEP 7 V13
(TIA Portal). The connection of a SIMATIC HMI Comfort Panel with SIMATIC WinCC
Advanced V13 (TIA Portal) or SIMATIC WinCC Professional V13 (TIA Portal) completes the
basic steps.
To implement the hardware section of this Getting Started, you will need:
● 1 × CPU 1511-1 PN (6ES7511-1AK00-0AB0)
● 1 × S7-1500 load current supply PM 70W 120/230VAC (6EP1332-4BA00)
● 1 × Mounting rail (6ES7590-1AB60-0AA0)
● 1 × digital input module DI 16x24VDC SRC BA (6ES7521-1BH50-0AA0)
● 1 × digital output module DQ 16x24VDC/0.5A ST (6ES7522-1BH00-0AB0)
● 2 × Front connectors (6ES7592-1AM00-0XB0)
● 1 × SIMATIC Memory Card with at 4 MB (e.g. 6ES7954-8LBxx-0AA0)
● 1 × Ethernet cable
The hardware mentioned above is also part of the following starter package:
Starter package S7-1500 with software: 6ES7511-1AK00-4YB5
To Next Page
Loading...
Need help?
General
