Siemens SIMATIC S7-1500T Getting Started

Software section
3.2 Creating the program
S7-1500
74 Getting Started, 05/2014, A5E03981761-AC
3.2.13
Local error handling
3.2.13.1
Handle errors within block
Procedure
Unlike the CPUs of the S7-300/400, CPUs of the S7-1500 go to STOP with errors much less
often. If an error occurs, it is entered in the diagnostics buffer of the CPU. You avoid the
CPU STOP by using local error handling at each block. You should preferably enable local
error handling during development of the user program.

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English