Siemens SIMATIC S7-1500T Getting Started

Software section
3.2 Creating the program
S7-1500
62 Getting Started, 05/2014, A5E03981761-AC
7. Insert a normally closed contact into the "Main" program block in the 5 network, and
interconnect it with the "FILLING_DONE" parameter.
8. Open the "Date & time" folder from the "Instructions" tab and insert the "RD_Loc_T" block
in the "Main" program block.

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English