Siemens SIMOTION Series User Manual

3. After booting, the BIOS selection menu is displayed:
Figure 13-2 BIOS selection menu
4. The following buttons are available in the BIOS selection menu:
Button Function
Continue Exit BIOS menu, continue with the startup process
Boot Manager Selection of the boot drive
Boot From File Starting from a .EFI file
SCU Device configurator (Setup Configuration Utility)
BIOS Update BIOS update from USB stick
MEBx Start the Intel Management Engine BIOS Extension
5. Select the SCU device configurator.
Troubleshooting/FAQs
13.2 Hotplug Enabled BIOS settings
SIMOTION P320-4 E / P320-4 S
204 Commissioning and Hardware Installation Manual, 11/2016

Siemens SIMOTION Series Specifications

General

Interfaces	PROFIBUS, PROFINET, Ethernet, USB
Programming Languages	LAD, FBD
Safety	Integrated safety functions
Typical Applications	Machine automation, robotics, packaging, printing
Relative Humidity	5% to 95% (non-condensing)
Protection Class	IP20
Certifications	CE, UL, cUL