Control Panel > All Control Panel Items > System > Device Manager.
1. Select the Network adapters in the dialog box below the "SIMOTION PC".
The available network connections are shown here.
Figure 3-8 Opening the Device Manager
2. Install the Microsoft Loopback Adapter via the Device Manager.
3. To do this, select the menu Action > Add legacy hardware.
The Add Hardware Wizard then opens.
Description
3.3 HMI and SIMOTION SCOUT
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016 63
To Next Page
Loading...
