Checking the installation of the network adapter
You can check the successful installation of the Microsoft Loopback Adapters in the
● Device Manager
● Internet connections
Device Manager
The Microsoft Loopback Adapter is displayed at Network adapters in the Device Manager.
Figure 3-16 Device Manager - Microsoft loopback adapter
Network connections
The newly installed Microsoft Loopback Adapter is also displayed at Network Connections.
Description
3.3 HMI and SIMOTION SCOUT
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016 69
To Next Page
Loading...
