1. Press the <SELECT> key, "Normal startup" is the default setting.
2. To call the "Startup menu", press the following keys in succession:
Menu reset key, HSK2 (horizontal SK2), VSK2 (vertical SK2)
Note
PPU with touch operation
To call the startup menu when powering up, there is an additional shortcut for all PPUs: "8"
ā "2" ā "8"
3. The Startup menu is displayed:
4. Using the cursor keys, select the menu item "Create software backup".
5. Press the <INPUT> key to confirm your selection:
6. Insert a storage medium into the slot on the front panel.
Service cases - software
3.3 Software backup
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1 45
To Next Page
Loading...
