Siemens SINUMERIK 828D Series User Manual

1. Press the <INPUT> key to start the backup.
The software first checks whether a backup was already generated on the card and outputs
a message. The backup can now be overwritten or the process interrupted by making the
appropriate operator action.
2. When starting to generate a backup, the following message is output:
Service cases - software
3.3 Software backup
Software and hardware
46 Service Manual, 08/2018, 6FC5397-5DP40-6BA1

Siemens SINUMERIK 828D Series Specifications

General

Display	10.4" TFT color display
Operating System	Embedded Linux
Power Supply	24V DC
Protection Class	IP65 (front), IP20 (rear)
Control Unit Type	CNC
Interfaces	Ethernet, USB, RS232
Programming	ShopMill, ShopTurn, G-code