Siemens SINUMERIK 828D Series User Manual

14.Switch the control on.
15.The control boots normally.
Note
If the procedure is interrupted, then it must be restarted.
If the system CompactFlash Card is no longer identified as a bootable CompactFlash Card,
then a boot system must be generated on this card. (see also: This is how you create a
boot system (Page 56) )
In this case, the license key of the system CompactFlash Card should be transferred to the
control.
Service cases - software
3.3 Software backup
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1 51

Siemens SINUMERIK 828D Series Specifications

General

Brand	Siemens
Model	SINUMERIK 828D Series
Category	Control Unit
Language	English