Siemens SINUMERIK 828D Service Manual

Service cases - software
3.6 Licensing
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
59
Preconditions
The following preconditions must be met in order to assign a license to a piece of hardware
via direct access and user interface:
● Hardware serial number
● A PC/PG with Internet connection and browser is available.
● The login data for direct access (e.g. per CoL (Certificate of License)) is available:
– License number
– Delivery note number
Note
Hardware serial number
Ensure that the serial number of the hardware displayed is the one you want to make
the assignment for. The assignment of a license to a piece of hardware cannot be
reversed via the Web License Manager .
Generating a license key
Procedure:
1. Select the "Start-up" operating area.
2. Press the menu forward key.
3. Press the "Licenses" softkey.
4. Press the "Overview" softkey and note down the serial number of the system
CompactFlash Card.
5. At your PG/PC, establish a connection to the Web License Manager
(http://www.siemens.com/automation/license
)

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash