Siemens SINUMERIK 840D sl - Page 412

11
Examples 08/2005
11.1 Standard machinin
g
p
rocesses
11
♥ Siemens AG, 2005. All rights reserved
11-412 SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
 Press the
softkey
Finished-part contour
6. Stock removal (roughing)
 Press the
Stock
removal
softkeys
 Enter parameters:
T
Roughing tool_80
F
0.300 mm/rev
V
200 m/min
Machining
Direction of Stock
Removal
Longitudinal (parallel to the Z-axis)
Machining side
Exterior
Machining direction
. (from front to back)
D
1.9 inc.
Cutting depth
UX
0.2 inc.
UZ
0.1 inc.
BL
Contour
Limit
No
Rear cut
No
 Press the
softkey