Siemens SINUMERIK 840Di - Technical Data

06.03
2.13 ADI4 (analog drive interface for 4 axes) (SW 09.01 and higher)
2-124
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
2.13.8 Technical data
Table 2-38 Technical data of the ADI4 module
Safety
Degree of protection IP20
Class of protection Class of protection I, acc. to VDE 0106 P1:
1982 (IEC 536);
Protection against ingress of solid foreign bodies and
water to IEC 529
Certifications CE/CSA, CE
Power consumption
Nominal load 12W
Max. 30.2W
Mechanical data
Dimensions WxHxD [mm] 154.4x325x48.5
Weight approx. 1.5kg
Climatic environmental conditions
Heat dissipation Open-circuit cooling
Operation Storage/transportation
Temperature limit values
0 ... 55°C –20 ... 55°C/–40 ... 70°C
Limit values of rel. humidity
5 ... 95%
not condensing
5 ... 95%
not condensing
per min. per hour
Condensation not admissible
Atmospheric pressure 700 ... 1060hPa 700 ... 1060hPa
Transportation height – –1000 ... 3000m
Shock loading during transportation
Free fall in transport package
v1000mm
J
2 Hardware Descri
p
tions