Siemens SINUMERIK 840Di - Install;Update SINUMERIK System

06.03
6.5 Service menu
6-194
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
6.5.1 Install/Update SINUMERIK System
A detailed description of the software installation/update is to be found in Sec-
tion 15.2, page 15-460.
6.5.2 SINUMERIK Tools and Options
PLEASE SELECT
1 Install/Update SINUMERIK System
2 SINUMERIK tools and options
3 DOS Shell
4 Start Windows NT (Service Mode)
5 SINUMERIK System Check
7 Backup/Restore
8 Start PC Link
9 Reboot (warm restart)
P 840Di Services
Your Choice [1,2,3,4,5,7,8,9,P] ?
Under menu item: Two SINUMERIK Tools and Options, you can execute the
following actions:
S Authorizing SIMATIC STEP7.
Authorizing SIMATIC STEP7
The following requirement must be fulfilled:
S The SIMATIC STEP7 software has already been installed on the PCU.
Select SINUMERIK Tools and Options with key “2”.
Following menu:
PLEASE SELECT
1 Activate Step7 for PCU
9 Return to Main Menu
Your Choice [1, 9] ?
To request authorization press key “1”.
Actual authorization is performed automatically during ensuring ramp-up of the
PCU under Windows NT.
Note
Authorization can also be performed on the SINUMERIK desktop by starting
the function “STEP7 Authorizing”.
Requirements
Operator action
6 Turnin
g
On and Ram
p
U
p