Siemens SINUMERIK 840Di - Sinumerik Pcu 70

06.03
2.7 SINUMERIK Industrial PC
2-83
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
2.7.2 SINUMERIK PCU 70
*) Orientation with reference
to operation with OP 012
**) Fastening screws
Housing cover
top
*)
**)
Fig. 2-23 PCU 70: Perspective view with installed hard disk drive
Designation Order No. (MLFB)
PCU 70 as spare part with Windows NT 4.0 US, with-
out MCI board:
PCU 70 500MHz, 128MB 6FC5210-0DF04-0AA0
The PCU 70 is essentially a PCU 50 with two extra expansion slots (PCI). It has
the following features:
S Processor min. Pentium III, 500MHz
S User memory (RAM) max. 512MB
S Hard disk min. 10.4GB (swappable)
S Windows NT 4.0 operating system US version
S Robust design (continuous operation, high noise immunity)
S Dimensions (W x H x D): 297x267x122mm
S Easy-to-service design
S Screen resolution 640x480 (VGA), up to 1024x768 (XGA)
S Power supply: 24VDC
S Interfaces:
– Parallel interface LPT1
Order No.
Features
2 Hardware Descri
p
tions