Siemens SINUMERIK 840Di - Page 132

06.03
3.3 Connection overview
3-132
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
1) Connector:
6ES7972-0BA40-0XA0; cable outlet 35
0
, without socket connector for pro-
gramming device
6ES7972-0BB40-0XA0; cable outlet 35
0
, with socket connector for pro-
gramming device
6ES7972-0BA11-0XA0; cable outlet 90
0
, without socket connector for pro-
gramming device
6ES7972-0BB11-0XA0; cable outlet 90
0
, with socket connector for pro-
gramming device
Cable:
6XV1830-0EH10; yard ware, non-trailable
6XV1830-3BH10; yard ware, trailable
2) Connector:
6GK1500-0EA02; cable outlet 180
0
, without socket connector for program-
ming device
Cable:
6XV1830-0EH10; yard ware, non-trailable
6XV1830-3BH10; yard ware, trailable
3) Connector:
6ES7972-0BB40-0XA0; cable outlet 35
0
, with socket connector for pro-
gramming device
6ES7972-0BB11-0XA0; cable outlet 90
0
, with socket connector for pro-
gramming device
Cable:
6XV1830-0EH10; yard ware, non-trailable
6XV1830-3BH10; yard ware, trailable
4) The cable is included in the scope of supply of the HHU or the mini HHU.
5) For an overview of the standard PC interfaces, see Fig. 3-6, page 3-129
and Fig. 3-7, page 3-129.
References: /BH/ Operator Components Manual
Component PCU 50.
6) – HT 6 always plugged: Max. of 200m from connector X111 to HT 6
– HT 6 not always plugged: Max. of 200m from connector X111 to HT 6
With repeater only:
RS485 (6ES7972-0AA01-1XA0)
Otherwise, total length of MPI from connector
X111 to distributor
v5m
– The line -4EA04 is not permitted.
Always connect the HT 6 at an end of the MPI path (integrated bus ter-
mination).
Note
The HT 6 can also be connected to a distributor with 3-core confirmation.
– Distributor: 6FX2006-1BC01
– Cable: 6FX2002-1AA83-1jj0
3 Desi
g
n