Siemens SINUMERIK 840Di - Page 178

06.03
6.2 First ramp-up
6-178
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
– Service menu software
– Norton Ghost
– Norton Ghost Walker
2nd partition/drive D:
The Images directory contains both the supplied image files and the image
files you have created for yourself.
The Install directory contains for example Windows NT drivers that can be
installed later or for updating.
3rd partition/drive E:
Drive E: is exclusively intended for the Windows NT system software.
4th partition/drive F:
Drive F: is intended for Windows NT applications, such as
– SINUMERIK 840Di
– SINUMERIK HMI Advanced.
Use the key “9” to call the service menu.
Please select:
3 DOS Shell
5 SINUMERIK System Check
6 Reboot System (warm restart)
7 Backup/Restore
8 Start PC Link
9 Exit
Your Choice [3,5,6,7,8,9] ?
Service menu <version>
The menu item 5 SINUMERIK System Check will grant you access to a follow-
ing menu to choose the error checks:
– Logic check of the directory/file system
– Physical check of the hard disk.
Using the menu item 7 Backup/Restore to:
S Backup
create ghost images of individual partitions or of the entire hard disk and to
save them locally under D:\Images or to transfer them to an external com-
puter using a parallel or network connection.
S Restore
load ghost images from an external computer using a parallel or network
connection.
The backup/restore process is described in detail in Section 15.3, page 15-471.
Service menu
SINUMERIK
System Check
Backup/Restore
6 Turnin
g
On and Ram
p
U
p