Siemens SINUMERIK 840Di - Page 361

06.03
10.5 Axes and spindles
10-361
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Axis-specific ($MA_ ...)
34220 ENC_ABS_TURNS_MODULO Range of absolute encoder with rotary encod-
ers
R2
34300 ENC_REFP_MARKER_DIST[n] Reference marker distance with distance-coded
measurements [encoder number]
34310 ENC_MARKER_INC[n] Interval between two reference marks with dis-
tance-coded measurements[encoder no.]
34320 ENC_INVERS[encoder] Linear measuring system inverse to the ma-
chine system [encoder number]
34330 REFP_STOP_AT_ABS_MARKER[n] Distance-coded linear measuring system with-
out target point [encoder number]
35150 SPIND_DES_VELO_TOL Spindle speed tolerance S1
36302 ENC_FREQ_LIMIT_LOW Encoder limit frequency for re-synchronization
36310 ENC_ZERO_MONITORING Zero mark monitoring
30250 ACT_POS_ABS Absolute encoder position on switching off
/FB/ Description of Functions, Basic Machine,
R1 Reference Point Approach
References
10 NC Start-U
p
with HMI Advanced