Siemens SINUMERIK 840Di - Page 407

06.03
11.1 Alarm and message texts
11-407
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
The default setting “0” means:
The help file supplied by Siemens provides a detailed description of the alarm.
A value between 1 and 9 uses an assignment entry in the MBDDE.INI file to
refer to a help file created by the user. See also Subsection 11.1.5,
page 11-408, section: HelpContext.
The associated text is given in inverted commas with the position parameters.
S The characters ” and # must not be used in alarm texts.
The character % is reserved for displaying parameters.
S If the user wishes to use an existing text, he can insert a reference to the
appropriate alarm text. 5-digit alarm number instead of “text”.
S The alarm text file may contain comment lines which must start with “//”. The
maximum length of the alarm text is 110 characters for a 2-line display. If the
text is too long, it is cut off and the symbol “*” added to indicate missing text.
S Parameter “%1”: Channel number
Parameter “%2”: Block number.
The ASCII file for PLC alarm texts has the following structure:
Table 11-4 Structure of text file for PLC alarm texts
Alarm
no.
Display Help ID Text Text on MMC
510000 1 0 “Channel %K FDDIS all” Channel 1 FDDIS all
600124 1 0 “Feed disable axis %A” Feed disable axis 1
600224 1 0 600124 Feed disable axis 2
600324 1 0 600224 Feed disable axis 3
703210 1 1 “User text” User text
...
703211 1 1 “User text%A ...” User text
Axis 1 ...
// Alarm text file for PLC alarms
References: /FB/, Description of Functions, Basic Machine
P3, Basic PLC Program
This number defines the alarm display type:
0: Display in alarm line
1: Display in a dialog box
The default setting “0” means:
The help file supplied by Siemens provides a detailed description of the alarm.
A value between 1 and 9 uses an assignment entry in the MBDDE.INI file to
refer to a help file created by the user. See also Subsection 11.1.5,
page 11-408, section: HelpContext.
Help ID
Text or
alarm number
Format of the
text file for
PLC alarm texts
Display
Help ID
11 Alarm and Messa
g
e Texts