Siemens SINUMERIK 840Di - Page 409

06.03
11.1 Alarm and message texts
11-409
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
The settings in this section define the following properties of the alarm list:
S TimeFormat
Here, the pattern is entered which is to be used for output of date and time.
It is the same as the CTime: Format of the Microsoft Foundation Classes.
S MaxNo
defines the maximum size of the alarm list.
S ORDER
defines the order in which the alarms are included in the alarm list:
FIRST puts more recent alarms at the head of the list,
LAST puts more recent alarms at the end of the list.
Example for the section: [Alarms]
– Time format: day.month.year hour:minute:second
– Maximum size of alarm list: 50
– Order: New alarms are to be put at the end of the list
[Alarms]
TimeFormat=%d.%m.%y %H:%M:%S
MaxNo=50
ORDER=FIRST
J
Section: [Alarms]
Example
11 Alarm and Messa
g
e Texts