Siemens SINUMERIK 840Di - Page 450

06.03
14.1 Explanations on data backup
14-450
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
For detailed information regarding the data backup of the components men-
tioned above, please refer to:
References: SinuCom NC:
Online help
HMI Advanced:
/BAI/ Operator’s Guide – HMI Advanced
A data backup with respect to SIMODRIVE 611 universal drives is carried out
using the start-up tool SimoCom U. When doing so, one parameter file each is
saved per drive on the hard disk of the PCU.
SimoCom U is part of the SINUMERIK 840Di installation.
For detailed information on the data backup of SIMODRIVE 611 universal
drives, please refer to:
References: /FBU/ SIMODRIVE 611 Universal, Description of Functions
Section:Closed-loop control unit for rpm servo control
and positioning
and
SimoCom U: Online help
SIMODRIVE 611
universal
drive data
14 User Data Backu
p
/Series Machine Start-U
p