Siemens SINUMERIK 840Di - Page 479

06.03
15.3 Data backup
15-479
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Notice
The network settings can be later modified/determined under Windows NT.
Windows NT taskbar: Start > Settings > Control Panel: Network
10. After Norton Ghost Walkert has updated the computer name and system
ID, the following menu is displayed:
It seems, that Ghost Restore succeeded.
Hit any Key to reboot the System.
When the PCU is booted for the next time under Windows NT, the partitions E:
and F: will be checked by the diagnostic program CHKDISK in succession
whereby the PCU is rebooted automatically.
After completion of the check, the system with the restored backup copy is ac-
tive.
15 SW Installation/U
p
date and Data Backu
p