Siemens SINUMERIK 840Di - Page 491

06.03
15.3 Data backup
15-491
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
S Input Machine Name MANUALLY
Type the new 10-digit computer name computer name into the input screen
form displayed. When you confirm the new name using the Input key, the
computer name is taken over into the system.
S Input Machine Name RANDOMLY
A random computer name is generated and taken over into the system.
S Abort
The computer name taken over with the image is kept.
Changes to the computer name and system ID are made using the program
Norton Ghost Walkert.
Note
The network settings can be later modified/determined under Windows NT.
Windows NT taskbar: Start > Settings > Control Panel: Network
9. After Norton Ghost Walkert has updated the computer name and system
ID, the following menu is displayed:
It seems, that Ghost Restore succeeded.
Hit any Key to reboot the System.
When the PCU is booted for the next time under Windows NT, the partitions E:
and F: will be checked by the diagnostic program CHKDISK in succession
whereby the PCU is rebooted automatically.
After completion of the check, the system with the restored backup copy is ac-
tive.
15 SW Installation/U
p
date and Data Backu
p