Siemens SIPROCESS GA700 - Page 173

Table 13-35 CALOMAT 7: Climatic conditions
Climatic conditions
Storage and transport -30…+70°C (-22 ... 158 °F)
Max. permissible ambient temperature surround‐
ing the basic device during operation
1)
0…50°C (32 ... 122 °F)
Ambient humidity (relative humidity) during stor‐
age, transport or operation
2)
<90%
1)
Restriction for installing an ULTRAMAT7 analyzer module (combined operation): 5…45°C (41 ... 113 °F)
2)
Avoid condensation on the installed components
Table 13-36 CALOMAT 7: Gas connections
Gas connections
Connection 󹪝ttings Pipe diameter 6mm (outer diameter)
Table 13-37 CALOMAT 7: Parts in contact with sample gases
Materials of wetted parts
Gas connection Stainless steel (Material No. 1.4571)
Clamping rings and union nut (set) Stainless steel (Material No. 1.4401)
Sample gas pipes Stainless steel (Material No. 1.4404)
Sensor mounting block Stainless steel (Material No. 1.4571)
Sensor Si, SiO
x
N
y
, Au, epoxy resin, glass
Gasket, contained in the sensor module Per󹪞uorelastomere FFPM
Technical speci󹪝cations
13.3Technical speci󹪝cations of analyzer modules
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB 173