Siemens SIPROCESS GA700 - Header

NOTICE
Aggressive atmospheres
Damage to device through penetration of corrosive vapors
• Make sure that the device is suitable for the area of use.
NOTICE
Direct sunlight
Device damage
The device can overheat or materials become brittle through the in󹪞uence of UV radiation.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. For more
information on this, see section "Technical speci󹪝cations (Page161)".
NOTICE
Damage to the membrane keyboard and the display
• Make sure when installing the device that the membrane keyboard and display are not
damaged.
6.2 Installation instructions
Note
Layout of the installation location
The installation location should be:
• Easily accessible
• Shock-free and vibration-free
• Within the ambient temperature limits
Installing the device
6.2Installation instructions
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB 61