Technical Data
4.22 Dimensions
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A4, Release date 08.2010
396
4.22 Dimensions
4.22.1 Panel Flush and Cubicle Mounting (Housing Size 1/6)
Figure 4-11 Dimensional drawing of a 7SK80 for panel flush or cubicle mounting (housing size
1
/
6
)
Note: An angle strip set (contains upper and lower mounting brackets) (Order-No. C73165-A63-D200-1) is necessary to
install the device in a rack. Using the Ethernet interface it might be necessary to rework the lower mounting bracket.
Please consider enough space for the cabling of the communication modules at the bottom of the relay or below the
relay.
Figure 4-12 Dimensional drawing of a 7SK80 (Terminalblock "D" with cap)
To Next Page
Loading...
