A Appendix
538
7UT613/63x Manual
C53000-G1176-C160-2
A.3.3 Assignment of Protection Functions to Protected Objects
Not every protection function implemented in the 7UT613/63x is useful or even possi-
ble for every conceivable protected object. The following table shows which protection
functions are possible for which protected objects. Once a protected object has been
configured (as described in subsection 2.1.3), only those protection functions are
allowed and settable that are valid according to the table below.
Figure A-29 Utilisation of the protective functions in different protected objects
To Next Page
Loading...
Need help?
General
