Startdrive commissioning tool
2.5 Drive control panel
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
43
The drive control panel (see Chapter "Using the control panel (Page 105)") is used to control
and monitor individual drives. You traverse drives with the control panel by specifying values.
Depending on the operating mode, these are, for example, speed setpoints.
The following figure shows the various components of the control panel:
Activate/deactivate master control
Figure 2-11 Control panel
To Next Page
Loading...
Need help?
General