Engineering and remote access
7.5 SIMATIC STEP 7
Power supply system SITOP PSU8600
202 Manual, 09.2018, A5E36758446-5-76
3. In dialog field "Properties - Ethernet interface PN-IO", select the "Parameter" tab, set the
IP address of the PROFINET interface and create a new subnet.
4. Confirm the properties of the new subnet and close the "Properties - Ethernet interface
PN-IO" dialog box.
The subnet is displayed as a horizontal line in the hardware view.
Inserting SITOP PSU8600 from the hardware catalog
1. Select the subnet.
2. Open the "Catalog" window using the "View > Catalog" menu command.
To Next Page
Loading...
